ATV & UTV 2019

BRAKES 1055 carriers & racks bumpers & winches accessories plows & implements frame & chassis utv accessories body handlebar & grips cables & levers fuel & intake engine clutch brakes drive steering & suspension bearings tires & wheels chemicals tools & shop exhaust electrical & ignition dealer aids 2019 ATV / UTV CATALOG 121827 WB314X WB342X 121831 WB5019 121832 121834 121836 121838 121662 WB395X 121849 121839 121841 121843 RATING COEFFICIENT OF FRICTION (C.F.) AT 250°F AND 600°F COMMENTS GENERAL APPLICATIONS EE 0.25-0.35 Both Temps 0.25% Fade Possible At 600°F Not recommended for performance applications as it shows poor c.F. In hot & cold temps. FE 0.35-0.45 At 250°F 0.25-0.35 At 600°F 2-44% Fade Possible At 600°F Not recommended for performance applications. Though it shows better cf. In cold temps, and has a high possibility of brake fade at warm temps. FF 0.44-0.45 Both Temps 0-22% Fade Possible At 600°F This pad is well suited for most conditions. It has minimal fade at high temps and is good for performance applications. FG 0.44-0.45 At 250°F 0.45-0.50 At 600°F Fading Very Rare This pad is great for most conditions, as it is softer than hh rated pad and will bed quicker on worn disks. This rating is good for performance applications. GG 0.45-0.50 Both Temps Fading Very Rare This pad is great for most conditions, as it is softer than hh rated pad and will bed quicker on worn disks. This rating is good for performance applications. • When looking for brake pads, the thing to remember is the 2 letter coefficient of friction rating. • Thegrade/ratings of brakepads available range fromE,F,G throughH.Each grade being a20%step up in friction deliv- ery. The different ratings offer a pad for all types of riders. • Semi-metallic pads and shoes are composed of a non- asbestos, semi-metallic carbon kevlar aramid fiber from Dupont.These haveadot coefficient of friction (c.F.) Rating of “ff” at 250° and 600°: 0.44-0.45 both temps. • These provide riders with long pad life, lowdust and brake disk wear, great stopping power and fade resistance at an economical price. • Full metal are the best selling pads we offer.This is a high- densitymaterial consisting of copper, carbon, tin, and lead. These have a coefficient of friction rating of “FG”. More specifically they rate 0.44-0.45 At 250° fand 0.45-0.50 At 600°f. These will provide a longer life than semi-metallic and wil outlast most competitors compounds. They have excellent performance and stability at all temperatures as well as reduced corrosion.Most importantly they perform equally well in wet and dry conditions.We recommended them for utility, mud, and sand applications. WILD BOAR ATV BRAKE PADS & SHOES