TOOLS & SHOP body accessories handlebar & grips cables & levers engine fuel & intake carriers & racks plows & implements frame & chassis utv accessories bumpers & winches electrical & ignition clutch brakes drive steering & suspension bearings tires & wheels chemicals tools & shop exhaust 1904 www.autodist.com | 207-942-6769 TWO-STROKE LEAK DOWN TESTER (DETECTOR) 678071 274.99 • Designed to check for air leaks in 2-stroke engines • Includes air pressure gauge, pump-up bulb and most fittings and adapters for single and twin cylinder 2-stroke motorcycle engines • Packed in a convenient carry box, complete with instructions COMPRESSION TESTER 0-300 PSI • Tapered rubber tip fits all common spark plug holes • Large easy to read gauge • SAE (0 PSI to 300 PSI) and Metric (1 to 21 kg/ cm2) 260097 24.95 COOLING SYSTEM TESTER, TYPE A 682204 162.99 • Pressurize motorcycle or ATV cooling system to check for leaks • Tests radiator and radiator cap for leak and correct pressure release limit • Use with a common hand pump to pressurize a non-running system (pump not included) • Remote, accurate, easy to read gauge makes readings and diagnosis easy • Unique design allows you to test the cooling system on a running engine to check for leaks or excessive pressure when system is hot Designed to work on radiator necks ranging from 15.75 mm - 20 mm Specified range is most commonly found on Japanese manufactured radiators and can also be found on some late model water-cooled American V-Twin. Measure your radiator neck to confirm correct size for your application. • Unique radiator adapter will work with most motorcycle, ATV and UTV appl icat ions equipped with a 30 mm spout • Type-A kit is designed to work on radiator necks ranging from 15.75 mm - 20 mm • Specified range is most commonly found on Japanese manufactured radiators, 2016 and up KTM, and can also be found on some late model water-cooled American V-Twins • Measure your radiator neck to confirm correct size for your application COOLING SYSTEM TESTER, TYPE B 682205 162.99 Designed to work on radiator necks ranging from 20 mm - 24.5 mm Specified range is most common on European manufactured radiators. • Pressurize motorcycle or ATV cooling system to check for leaks • Tests radiator and radiator cap for leak and correct pressure release limit • Remote, accurate, easy to read gauge makes readings and diagnosis easy • Use with a common hand pump to pressurize a non-running system (pump not included) • Unique design allows you to test the cooling system on a running engine to check for leaks or excessive pressure when system is hot • Unique radiator adapter will work with most motorcycle, ATV and UTV appl icat ions equipped with a 30 mm spout • Type-B kit is designed to work on radiator necks ranging from 20 mm to 24.5 mm Specified range is most common on some European manufactured radiators including 2015 and earlier KTM Measure your radiator neck to confirm correct size for your application.
RkJQdWJsaXNoZXIy MzA4ODQ=