UTV ACCESSORIES body accessories handlebar & grips cables & levers engine fuel & intake carriers & racks plows & implements frame & chassis utv accessories bumpers & winches electrical & ignition clutch brakes drive steering & suspension bearings tires & wheels chemicals tools & shop exhaust 258 www.autodist.com | 207-942-6769 650727 650728 2 SIDED HARD COATED POLY • 0.220 Thick 2-sided Hard Coated Polycarbonate—Maximizes visibility while minimizing physical damage to the windshield WINDSHIELDS 650378 650380 650804 UTV WINDSHIELD WIPER WASHER KIT WARNING: Installation requires drilling holes your windshield. Please read directions carefully and install AT YOUR OWN RISK. Only attempt to install on hard coated polycarbonate windshields. Acrylic windshields will most likely crack if you attempt to install this kit. DO NOT attempt to install in glass. The UTV Windshield & Headlight Wiper Washer Kit from Seizmik includes: wiper motor assembly; wiper arm & blade; pump; washer fluid reservoir; hose & fittings; wire harness; and mounting hardware. Equipped with dual, independently adjustable jets, 110º of wiper range motion to cover the entire driver’s side of the windshield, and a 2 speed motor with an automatic park feature to position the blade up and out of the way when turned off. VERSA-VENT SELF INSTALL KIT 650766 KIT (Includes 2 Vents) 79.99 FOR POLYCARBONATE WINDSHIELDS ONLY WARNING: Installation requires cutting your windshield. Please read directions carefully and install AT YOUR OWN RISK. Only attempt to cut polycarbonate windshields. Acrylic windshields will most likely crack if you attempt to install this kit. DO NOT attempt to install in glass. The Versa-Vent self install kit from Seizmik, includes 2 Seizmik Versa-Vents, cutting template, and all mounting hardware. The dual vent system is designed to add driver and passenger ventilation and anti-fogging features to polycarbonate windshields. The Versa-Vent features a defog mode. The vent is made of glass filled nylon, so it’s incredibly durable. The scoop on the front gathers up air off the hood and re-directs it to inside the vehicle so even at very slow speeds there is a surprising amount of air that can come through the vent. The design of the scoop and the gasket between it and the windshield keeps precipitation out while still allowing airflow in—as much or as little as either the driver or passenger desires. • Made of super-durable glass-filled nylon • Designed with built-in defogging vents • Gasket sealed against water intrusion • Fully adjustable easy-to-use louver for variable airflow FOR ANY HARD COATED POLYCARBONATE WINDSHIELD (HARD COATED POLY ONLY!!) • 14” AUTOMOTIVE WIPER BLADE—May be replaced with a standard style wiper blade • WIPER MOTOR ASSEMBLY—2 speed motor with automatic park position • STURDY STEEL BACKING PLATE—Heavy Duty mounting structure with rubber vibration isolation bumpers against windshield • HOSE—16’ long hose provides enough length to place jets in a number of locations • 1.5 QUART RESERVOIR— Enough capacity to get the job done • 4 SPRAY NOZZLES— Independently adjustable, dual jets in each nozzle • PLASTIC HOSE FITTINGS— Multiple choices for various configurations • SIMPLE INSTALLATION— Position wiper on your windshield. 650729 299.99 FITMENT: RS1 650727 349.99 Ranger Full Size 650378 499.99 Ranger Mid Size 650380 419.99 POLARIS KXR 1000 650728 579.99 RZR Pro XP 650804 379.99 KAWASAKI
RkJQdWJsaXNoZXIy MzA4ODQ=