FUEL & INTAKE body accessories handlebar & grips cables & levers engine fuel & intake carriers & racks plows & implements frame & chassis utv accessories bumpers & winches electrical & ignition clutch brakes drive steering & suspension bearings tires & wheels chemicals tools & shop exhaust 822 www.autodist.com | 207-942-6769 INLINE FUEL VALVE • The Motion Pro Inline Fuel Valves are ideal for use on ATVs or other vehicles where an inline fuel petcock is necessary • 142575 & 142576 are not recommended for engines over 300cc • The Motion Pro Inline Fuel Valves are ideal for use on ATVs or other vehicles where an inline fuel petcock is necessary • Not recommended for engines over 200cc INLINE FUEL VALVE • The Motion Pro Inline Fuel Valves are ideal for use on ATVs or other vehicles where an inline fuel petcock is necessary • 142579 features 1/4 in. pipe thread on one end & a 1/4 in. barb on the other FUEL VALVE FUEL LINE FITTINGS KIT 142575 1/4” Fuel Line 19.99 142576 5/16” Fuel Line 16.99 142574 Fuel Line Fittings Kit 458.99 142579 1/4 NPT x 1/4” Barb 20.99 142586 1/4” Barb x 5/16” Barb 9.50 • Contains a wide selection of Y and T fittings, hose clamps, O-clips and O-clip Pincher Tool • Sizes from 3/16 in. - 3/8 in. • ABS plastic case • Replacements available in packs of 10 • Ideal for the shop or home mechanic 1/4” plastic “Y” fitting Primer inlet needle to convert Mikuni carburetors to primer or button type dash mounted primers. Straight fuel fitting 1/4” & 7/16” nipple. Used with our DP10672. Metal 1 1/2” length. “L” fuel fitting 1/4” & 7/16” nipple. Used with our DP10672. 3/32” plastic “T” fitting 1/8” plastic “T” fitting 1/4” plastic “T” fitting 1/4” straight metal fitting for impulse line or carburetor. Rubber grommet only for elbow fitting LP077250. Universal. FUEL LINE FITTINGS - SOLD EACH LP077161 1.24 LP077812 1.00 LP077077 1.25 DP10672 0.95 LP077227 1.40 8679 2.95 8678 4.95 LP077250 6.95 LP077587 2.30 LP077126 1.00 Brushed elbow metal press fitting with rubber grommet. Can be added to any metal tank by drilling 1/2” hole, insert fitting and tighten. 1/4” In-line cut-off valve. Uses (2) clamps our 20-5905. Composite Material. New design brass in-line. Uses double neoprene seals and two standard O-rings. All uses with 1/4” line. FUEL FLOW SHUT OFF VALVES - SOLD EACH 1/4" Nipple - 90o 1/4" Nipple Straight LP077118 11.95 868 12.95 5841 6.10 678038 12.99
RkJQdWJsaXNoZXIy MzA4ODQ=