accessories towables & floats body controls electrical driveline engine fuel & intake chemicals tie downs tools MARINE dock accessories tools flotation devices TOWING & LOADING towing & loading 426 www.autodist.com | 207-942-6769 PART # SIZE CS11035 1.50 3/8" - 16 x 3" PART # SIZE CS10921 0.99 7/16" - 14 x1" • Display packages of 4 bolts, washers and nuts • Zinc plated steel, grade 2 • Can be used to mount fenders to fender brackets MOST TRAILER MANUFACTURERS USE GRADE 5 SCREWS AND BOLTS FOR MAXIMUM SAFETY AND SECURITY. GRADE 5 HARDWARE HAS A HIGHER TENSILE STRENGTH THAN THE GRADE 2 HARDWARE USUALLY FOUND IN HARDWARE STORES. • Packs of 4 bolts, washers and nuts • Zinc plated steel, grade 5 • Can be used to mount brackets, coupler and winch stands 3/8" - 16 SLOTTED TRUSS HEAD BOLTS • Packs of 4 bolts, washers and nuts • Zinc plated steel, grade 5 • Used to mount tongue to trailer frame HEX HEAD BOLTS PART # SIZE CS10941 3.75 3/8" - 16 x 3/4" HEX HEAD BOLTS JON BOAT FRONT SUPPORT BUNK BLACK CARPET INSTALLED Carpeted 2" x 24" bunk cush i ons and suppo r t s front of jon boat or other flat bottom boat • Adjusts from 5-1/2" to 8" above tongue • Place on tongue at proper length for boat • Brackets are hot dipped galvanized • Complete with mounting hardware for 2" or 3" tongue LONGER U-BOLT KIT FOR FRAMES UP TO 3" WIDE X 5-1/4" HEIGHT • Longer u-bolts to mount all styles of boat guides on taller trailer frames up to 5-1/4" in height • Leg length is 6" with thread length of 2" • 5' bunkboard style guide-on requires 2 sets, all other guide-ons require 1 set PART # DESCRIPTION CS27850 78.63 SOLD per pair Boxed PART # DESCRIPTION CS11416 31.04 SOLD per Kit Set of 4 U-bolts Makes boat loading easier • Galvanized posts are pre-assembled with 9" roller and end caps • Can be mounted on top of frame for extra height • Complete in display box • Height: 21" • Adjust: out to 13" each side • Fits: frame up to 3" W x 4-1/4" H • Post: 1-1/2" sq. 16 ga. • Matl: pre-galvanized steel • Angle: 90o ROLLER GUIDE-ON REPLACEMENT PARTS PART # DESCRIPTION MEASUREMENTS 690126 9.95 Roller 2" x 9" 690160 4.95 End Cap 2" x 1-3/4" CS10705 13.47 Shaft 1/2" x 12-3/4" 690188 1.35 Cap Nut 1/2" ROLLERS ALREADY PRE-ASSEMBLED TO POSTS PART # DESCRIPTION CS27610 191.84 Sold per per
RkJQdWJsaXNoZXIy MzA4ODQ=