Offroad 2019

937 2019 OFFROAD CATALOG BRAKES accessories body handlebar & grips cables & levers engine fuel & intake electrical & ignition clutch drive bearings brakes steering & suspension tires exhaust chemicals tools & shop WILD BOAR DIRT BIKE BRAKE PADS & SHOES • Manufactured by a ISO9002, QS9000 and TS16949 accredited factory • The biggest friction material manufacturer in taiwan. • All brake shoes or pads are non-asbestos, semi-metallic kevlar/carbon fiber. • Full metal brakes contain copper, carbon, tin, lead and other metallic elements. • Full metal brake pads are “GG”rated-hi torque and friction for hi-performance machines. • Semi-metallic pads and shoes are “FF” rated. * BRAKE SHOES ARE AVAILABLE IN A STANDARD AND A GROOVED LINING * When looking for brake pads, the thing to remember is the coefficient of friction rating for that pad. This is a 2 letter rating system ( see graph at right ). The grades of brake pads available range from e,f,g through to h rating, each grade being a 20% step up in friction delivery. We offer a pad option for all riders. Semi-metallic: semi-metallic brake pads and shoes are composed of a non-asbestos, semi-metallic carbon kevlar aramid fiber from dupont and have a dot rating of “FF” coefficient of friction (C.F.) At 250° and 600°: 0.44-0.45 Both temps. These provide riders with a long pad life, low dust and brake disk wear, great stopping power and fade resistance, and an economical price. MAKE/MODEL YEAR FRONT REAR SEMI- METALLIC FULL METAL SEMI- METALLIC FULL METAL APRILIA MXV 4.5 09-12 121104 10.95 WB185R 22.10 121785 19.95 121211 22.95 RVX 4.5/5.5 06-12 121104 10.95 WB185R 22.10 121785 19.95 121211 22.95 SXV 4.5/5.5 09-12 ----- ----- 121785 19.95 121211 22.95 ATK 250/260 (2 STROKE ENDURO) 03 121104 10.95 WB185R 22.10 121173 10.95 121217 17.95 250 (2T) 04 121131 10.95 121201 16.95 121173 10.95 121217 17.95 370 (2T) 04 121131 10.95 121201 16.95 121173 10.95 121217 17.95 450 MX 07 121131 10.95 121201 16.95 121173 10.95 121217 17.95 450 XC 07 121131 10.95 121201 16.95 121173 10.95 121217 17.95 ENDURO 450 07 121131 10.95 121201 16.95 121173 10.95 121217 17.95 MOTARD 450 07 121132 10.95 121202 23.95 121159 7.95 121210 18.95 ENDURO 500 03 121131 10.95 121201 16.95 121173 10.95 121217 17.95 500/600 SUPER MOTARD 02-03 121132 10.95 121202 23.95 121173 10.95 121217 17.95 500 (2T) 04 121131 10.95 121201 16.95 121173 10.95 121217 17.95 560 84-85 121129 10.95 121198 21.95 ----- ----- 86 121129 10.95 121198 21.95 ----- ----- 87-88 121129 10.95 121198 21.95 121126 10.95 121196 18.95 560 & OTHER MODELS 89-91 121133 10.95 121203 24.95 121147 10.95 121182 18.95 ALL MODELS 92 121133 10.95 121203 24.95 121129 10.95 121198 21.95 ALL MODELS 93-96 WB135X 13.95 121185 16.95 WB135X 13.95 121185 16.95 ALL MODELS 97-99 121131 10.95 121201 16.95 121173 10.95 121217 17.95 600 DTM 03 121132 10.95 121202 23.95 121173 10.95 121217 17.95 605 ENDURO 03 121131 10.95 121201 16.95 121173 10.95 121217 17.95 620 (2T) INTIMIDATOR 04 121131 10.95 121201 16.95 121173 10.95 121217 17.95 700 (2T) INTIMIDATOR 04 121131 10.95 121201 16.95 121173 10.95 121217 17.95 BMW G 450 X 08-11 121131 10.95 121201 16.95 121173 10.95 121217 17.95 F 650/650 ST (CHAIN DRIVEN/INC ABS) 93-00 121137 10.95 121205 25.95 121172 12.95 121216 19.95 F 650/650 GS (CHAIN DRIVEN/INC ABS) 93-08 121137 10.95 121205 25.95 121172 12.95 121216 19.95 F 650 GS (TWIN CYL) 08-12 121137 10.95 121205 25.95 121172 12.95 121216 19.95 F 650 CS (BELT DRIVEN/INC ABS) 00-06 121137 10.95 121205 25.95 121172 12.95 121216 19.95 G 650 GS (SINGLE CYLINDER/CHAIN DRIVE 09-15 121137 10.95 121205 25.95 121172 12.95 121216 19.95 GF 650 X CHALLEGE 07 121137 10.95 121205 25.95 121172 12.95 121216 19.95 GF 650 X COUNTRY 07-09 121137 10.95 121205 25.95 121172 12.95 121216 19.95 RATING Coefficient Of Friction (C.F.) At 250 O f And 600 C f COMMENTS GENERAL APPLICATIONS EE 0.25-0.35 both temps 0.25% Fade pos- sible at 600 C F Not Recommended for Performance applications as it shows poor C.F. in hot & cold temps. FE 0.35-0.45 at 250 O F 0.25-0.35 at 600 O F 2-44% Fade pos- sible at 600F Not Recommended for Performance applications. Though it shows better C.F. in cold temps, and has a high possiblilty of brake fade at warm temps. FF 0.44-0.45 both temps 0-22% Fade pos- sible at 600F This pad is well suited for most conditions. It has mini- mal fade at high temps and is good for performance applications. FG 0.44-0.45 at 250 O F 0.45-0.50 at 600 O F Fadding Very Rare This pad is great for most conditions, as it is softer than HH rated pad and will bed quicker on worn disks. This rating is good for performance applications. GG 0.45-0.50 both temps Fadding Very Rare This pad is great for most conditions, as it is softer than HH rated pad and will bed quicker on worn disks. This rating is good for performance applications. Full metal: the best selling pads we offer. The full metallic high-density material consists of: copper, carbon, tin, lead and other metallic elements and have a dot rating of “FG”. FG coefficient of friction (C.F.) at 250° and 600°: 0.44-0.45 At 250°F, 0.45-0.50 At 600°F. These will provide a longer life than similar compounds from competitors, excellent performance and stability at all temperatures, reduced corrosion, and work equally well in wet and dry conditions, and are recommended for utility, mud, and sand applications.