Winter 2020

ENGINE accessories body & chassis engine electrical & ignition controls fuel & intake rewind clutch drive rear suspension front suspension traction mini sleds chemicals 134 tools & shop trailer & towing SPI PISTON KITS continued APPLICATION YEAR SIZE PISTON KIT# PISTON RING # WRIST PIN # TOP END BEARING # HYPERDRIVE PISTON # OEM # YAMAHA CONTINUED MOUNTAIN MAX 700 97-04 70.50MM 9828PS 9828RS - 120215 - 8CH-11631-00-A0 SX R 700 00-02 VENTURE 700 98-03 V-MAX 600 SX 00 V-MAX 700 97-02 V-MAX 700 DLX 99-02 V-MAX 700 SX 97-99 V-MAX XTC, DX 98 MOUNTAIN SRX 700 98-99 69.00MM 9831PS 9831RS 120215 - 8DN-11631-10-AO SRX 700, S 00-02 8EK-11631-00-00 SX 700 VIPER 02-04 SX 700 VIPER MOUNTAIN 03-06 SX 700 VIPER ER 02-04 SX 700 VIPER S 04 VENTURE 700 04-05 TEFLON/MOLY COATED SKIRTS WITH HARD ANODIZED DOME ID x OD x LENGTH PART # (MM) NB9522 12.95 16 x 20 x 22.5 NB9502 12.95 16 x 21 x 20 NB9505 12.95 18 x 22 x 22 NB9503 12.95 18 x 23 x 22 120130 9.95 18 x 23 x 24 62-09021 6.95 20 x 24 x 22.5 NB9524 12.95 20 x 24 x 22.7 120215 12.95 20 x 25 x 21.8 NEEDLE BEARINGS SPI needle cage top end bearings made to OEM specifications. ID x OD x LENGTH PART # (MM 120216 12.95 20 x 25 x 22.8 NB9521 12.95 20 x 25 x 24 NB9523 12.95 20 x 26 x 24 62-09015 9.50 21 x 27 x 24.7 120922 12.95 22 x 27 x 24.8 62-09020 6.95 22 x 27 x 23.7 62-09019 8.95 24 x 29 x 24 62-09022 7.50 24 x 29 x 26 POCKET MAGNETIC RETRIEVER W1261 2.55 PISTON CIRCLIPS Sold per pair KX915CC 15mm 2.99 CIRCLIP INSTALLATION TOOL 62-12029 20mm 39.95 62-12030 18mm 38.95 62-12031 22mm 45.95 • Telescoping tool with metal scribe and threaded tip accepts three accessory attachments: - Lighted magnetic retriever - illuminates and retrieves small parts from dark, confined areas - Compact magnetic retriever - 1-1/4” diameter swivel inspection mirror • Extends to 24” • Batteries included PISTON PIN PULLER 571565 28.95 Remove or install piston wrist pins easily with this puller from SLP. The body of this puller is made of a special high strength composite which eliminates marking, scarring or distortion of the piston. The face of the body of this puller is specially designed to bridge recessed wrist pin bosses found on late model pistons in order to provide a straight, precise pull each and every time. It is provided with three different sizes of nuts, which fit wrist pins from 15mm thru 24mm. PISTON PIN PULLER SP20181 64.95 Includes two plungers: 14mm & 17mm