Winter Catalog

TRACTION accessories body & chassis engine electrical & ignition controls fuel & intake rewind clutch drive rear suspension front suspension traction mini sleds chemicals tools & shop trailer & towing 1061 48 PIECESWITH T-NUTS GDC8750-48 .875” 27.50 7mm. The finest carbide steel made with brazed construction guaranteeing the carbide not to come out and allowing field sharpening, domed washers provide a secure mount when used in rubber tracks, and an 80 degree point maximizing penetration. Package of 24 complete with T-nuts - bulk package with studs only. BACKING PLATES SOLD SEPARATELY. .370 thread length. Carbide. 7mm thread for added strength. Requires 1” 7mm T-Nut. The most aggressive single point stud available for ice or dirt, giving you the most positive traction available, once the ground surface is penetrated. Can be used with either rubber or cleated tracks. Steel. BACKING PLATES SOLD SEPARATELY. 48 PIECES - STUD ONLY CLT1060 7MM 1.060” 101.98 GOLD DIGGER CARBIDE "CHISEL TOOTH” STUD NYLON NUTS FOR TRACTION MASTER STUDS NYLON LOCK NUTS - 48 PCS NYL5000 7MM 9.98 NYL5020 5/16” 10.49 ALUMINUM BIG NUTS Stud lengths of 1.325" and 1.450" are packaged with ALN2-4500 Big Nuts. The 1.575" and 1.740" studs are packaged with the taller ALN2-7000. The aluminum Big Nut with a nylon insert provides added support to longer length studs. It is available in two sizes. Use ALN2-7000 for 1.575" studs and longer. Use ALN2-4500 for 1.450", 1.325" studs. Packaged in quantities of 24, 96 and 1000 pieces. SIZE 24 PCS 96 PCS 1000 PCS 5/16” FOR 1.450" OR SHORTER ALN2-4500 13.98 ALN2-4500B 50.98 ALN2-4500M 515.98 5/16” FOR 1.575" OR SHORTER ALN2-7000 13.98 ALN2-7000B 50.98 ALN2-7000M 515.98 7MM ----- ALN5050B* 19.50 ----- * Aluminum nut with locking washer, no nylon insert • Strong and thick steel for tighter thread tolerance • Available in packages of 48 STANDARD BARREL T-NUTS DESCRIPTION SIZE PART # Dished Head T-Nut (Standard T-Nut Barrel with 3/4" Head) 48pc. 1/4-20 ATD7500 37.98 Dished Head T-Nut (Standard T-Nut Barrel with 15/16" Head) 48pc. 1/4-20 ATD9380 37.98 Dished Head T-Nut (Standard T-Nut Barrel with 15/16" Head) 48pc. 7mm ATD9387 37.98 96 PIECESWITHOUT T-NUTS GDC8750B .875” 29.50 GDC1000B 1.000” 39.50