Winter Catalog

CONTROLS accessories body & chassis engine controls clutch drive rear suspension front suspension traction chemicals tools & shop trailer & towing mini sleds electrical & ignition fuel & intake rewind 457 POLARIS PROTAPER RISER KITS Raising your ProTaper bars on a Polaris sled used to be a challenge – until now. These kits include the riser block and replacement bolts which will work with the stock one piece top clamp • The PowerRiser 325 is 3.25" wide and 2" tall and fits on most snowmobiles with no cable modification needed. For ATV installation please check the amount of slack in your cables before purchasing. This updated version has been modified to work with all original equipment bar clamps – even the one piece style bottom clamps. • If you are looking for more than a 2” riser check out the Pivot Adapter kit or Universal Pivot Riser.For ATVs with wider bar clamps, check out the PowerRiser 425. PM45419 75.00 POWERRISER 325 The PowerRiser 325 comes in a 2” rise and will work on most snowmobiles with no cable modification. Check your cable slack for use on ATVs. Note - One pieceOE bar clamps will not work with the PowerRiser 325 - Replacement 7/8” bar clamps are required (PM15470) POWERRISER 325 POWERRISER 475 The PowerRiser 475 comes in two heights – 2” and 3”. Both are available for standard 7/8” bars and oversize 1 1/8” bars. 2” Tall X 3.25” wide, 7/8” to 1 1/8” Bar PM15421 75.00 2” Tall X 4.75” wide, 7/8” to 7/8” Bar PM15430 75.00 2” Tall X 4.75” wide, 7/8” to 1 1/8” Bar PM15431 75.00 3” Tall X 4.75” wide, 7/8” to 7/8” Bar PM15432 80.00 3” Tall X 4.75” wide, 7/8” to 1 1/8” Bar PM15433 80.00 2.25” Tall X 4.75” wide, 1 1/8” to 1 1/8” Bar PM15440 85.00 ARCTIC CAT ALL MODELS 1999 & OLDER HEIGHT PART # 1" 127298 18.95 2" 127299 29.95 3" 127300 34.95 4" 127301 42.95 ARCTIC CAT ALL MODELS 2000 & NEWER HEIGHT PART # 1" 127302 13.95 2" 127303 24.95 3" 127304 32.95 4" 127305 47.95 POLARIS ALL MODELS 1999 & OLDER HEIGHT PART # 1" 127298 18.95 2" 127299 29.95 3" 127300 34.95 4" 127301 42.95 SKI-DOO ALL MODELS HEIGHT PART # 1" 127306 18.95 2" 127307 26.95 3" 127308 30.95 4" 127309 34.95 POLARIS ALL MODELS EXCEPT RX-1 HEIGHT PART # 1" 127310 19.95 2" 127311 28.95 3" 127312 34.95 4" 127313 43.95 • Extruded 6061 T6 aluminum • Includes mounting hardware • Anodized black HANDLERBAR RISERS Introducing the new PowerRiser from PowerMadd. This one piece design offers superior strength at an unequaled price. The PowerRiser provides dual pivot points so you can position the riser front to back, while positioning your bars up and down for the perfect bar placement.The PowerRiser comes in two widths – 3.25” for snowmobiles as well as Can Am and Polaris ATVs, and 4.75” for ATVs andmotorcycles. Both widths allow you to use standard 7/8” bars or oversize 1 1/8” bars. 1” NEW 224094 35.00 2” PM45490 40.00 3” NEW 224095 45.00