TRACTION accessories body & chassis engine electrical & ignition controls fuel & intake rewind clutch drive rear suspension front suspension traction mini sleds chemicals tools & shop trailer & towing 1208 ACCESS RIES rie body chassis engine electrical ignition controls fuel intake re ind clutch drive rear suspension front suspension traction ini sleds che icals tools & shop trailer & to ing 2 www.autodist.com | 207-942-6769 48 PIECES - STUDSW/LOCK NUT GDP117M 1.175 5/16” 165.98 GDP132M 1.325 5/16” 165.98 GDP145M 1.450 5/16” 165.98 MEGA-BITE CARBIDE GOLD DIGGER TRACTION MASTER MODIFIED CARBIDE A Gold Digger Traction Master modified wi th a machine point sharpened for excellent penetration. 45o carbide. "CHISEL TOOTH” PUSH-THRU STUD The 1.325" and the 1.450" packages have the ALN2-4500 big nuts included. The 1.575" and the 1.740" packages have the ALN2-7000 big nuts included. 1008 packs now consist of 10 packages of 96 and 2 packages of 24 with a savings of up to 10% over the old 1000 pack. The unique design of four flat sides on the penetration portion of the tough 5/16” shank provides additional contact surface for added acceleration, deceleration and directional control under changing trail conditions. Professional snocross racers love the enhanced controllability the 60° carbide tipped Mega-Bite® delivers. For trail riding, the Mega-Bite® is available in lengths of .875" through 1.450" in package quantities of 24, 96, 144 and 1,008 pieces. For snocross racing, lengths of 1.575" and 1.740" are available in quantities of 24, 96 and 1,008. SIZE 6 PCS 24 PCS 96 PCS 144 PCS 1008 PCS 1.075" X 5/16” ----- MEG1075 56.98 MEG1075B 217.98 MEG1075C 320.98 MEG1075M 2077.98 1.175" X 5/16” ----- MEG1175 56.98 MEG1175B 217.98 MEG1175C 320.98 MEG1175M 2077.98 1.325" X 5/16” MEG1325-6 18.98 MEG1325* 56.98 MEG1325B* 217.98 MEG1325C* 320.98 MEG1325M* 2077.98 1.450” X 5/16” MEG1450-6 18.98 MEG1450* 56.98 MEG1450B* 217.98 MEG1450C* 320.98 MEG1450M* 2077.98 *Now being packaged with ALN2-4500 big nuts **Now being packaged with ALN2-7000 big nuts The 1.325" - 1.860” packages have the ALN2-4500 big nuts included. The tough and dependable Chisel Tooth™ Traction Master® is a workhorse. This stud penetrates like a pointed stud but acts like a scooper with a flat surface for traction. This stud is offered to the trail rider in lengths of 1.075" through 1.860” with a 5/16” shank and a 1” head in packages of 48. In addition, for competition, Woody's also offers a lighter 7mmwith a 7/8" head in lengths of 1.000" through 1.200". All are available in packages of 48 pieces with lock nuts. SIZE 48 PCS 1.000" X 7MM CAP1000 144.98 1.060" X 7MM CAP1060 144.98 1.200" X 7MM CAP1200 144.98 1.075" X 5/16” CAP1075 144.98 1.205" X 5/16” CAP1205 144.98 1.325" X 5/16” CAP1325* 144.98 1.630” X 5/16” CAP1630-S* 144.98 1.860” X 5/16” CAP1860-S* 144.98 *Now being packaged with ALN2-4500 big nuts The most aggressive single point stud available for ice or dirt, giving you the most positive traction available, once the ground surface is penetrated. Can be used with either rubber or cleated tracks. Steel. BACKING PLATES SOLD SEPARATELY. 48 PIECES - STUD ONLY CLT1060 7MM 1.060” 101.98 "CHISEL TOOTH” STUD 48 PIECESWITH T-NUTS GDC8750-48 .875” 27.50 7mm. The finest carbide steel made with brazed construction guaranteeing the carbide not to come out and allowing field sharpening, domed washers provide a secure mount when used in rubber tracks, and an 80 degree point maximizing penetration. Package of 24 complete with T-nuts - bulk package with studs only. BACKING PLATES SOLD SEPARATELY. .370 thread length. Carbide. 7mm thread for added strength. Requires 1” 7mm T-Nut. GOLD DIGGER CARBIDE 96 PIECESWITHOUT T-NUTS GDC8750B .875” 29.50 ALUMINUM BIG NUTS Stud lengths of 1.325" and 1.450" are packaged with ALN2-4500 Big Nuts. The 1.575" and 1.740" studs are packaged with the taller ALN2-7000. The aluminum Big Nut with a nylon insert provides added support to longer length studs. It is available in two sizes. Use ALN2-7000 for 1.575" studs and longer. Use ALN2-4500 for 1.450", 1.325" studs. Packaged in quantities of 24, 96 and 1000 pieces. SIZE 24 PCS 96 PCS 1000 PCS 5/16” FOR 1.450" OR SHORTER ALN2-4500 13.98 ALN2-4500B 50.98 ALN2-4500M 515.98 5/16” FOR 1.575" OR SHORTER ALN2-7000 13.98 ALN2-7000B 50.98 ALN2-7000M 515.98 7MM ----- ALN5050B* 19.50 ----- * Aluminum nut with locking washer, no nylon insert
RkJQdWJsaXNoZXIy MzA4ODQ=