CLUTCH accessories body & chassis engine electrical & ignition controls fuel & intake rewind clutch drive rear suspension front suspension traction mini sleds chemicals tools & shop trailer & towing 716 www.autodist.com | 207-942-6769 MODEL YEAR PART # Arctic Cat models with the Boss secondary clutch (Tied clutches) 2016-20 378481 5.99 Polaris models with Team clutches 2016-20 378481 5.99 Ski-Doo models 2016-20 378481 5.99 Team TSS-04 & TSS-98 clutches 2016-20 378481 5.99 • Push/pull style exhaust spring tool. • For use on ATV, UTV and Snowmobile exhaust systems. • This is the best tool The Clutch Guys have used for removing and installing exhaust system springs. • Heavy duty design with rubber coated handle for durability. EXHAUST SPRING TOOL 378496 14.99 MODEL YEAR PART # Arctic Cat 9 tower and newer 6 tower models All 378491 54.99 Comet 100C, 101C, 102C, 108C, 108EXP All 378491 54.99 Polaris models All 378491 54.99 378482 19.95 CLUTCH TOOLS • Removes Polaris primary clutch buttons quickly without damage • Used with all Polaris models BUTTON REMOVAL TOOL BELT REMOVAL TOOL • Designed to remove and install the spider • 3/4” Square drive • Fits Arctic Cat, Comet, & Polaris models SPIDER TOOL • Used to open secondary clutches for belt removal • High quality steel tool • Fits Arctic Cat, Polaris, Ski-Doo & Team TSS models 380305 9.99 • Installation tool designed to safely install flyweight bushings without the risk of crushing them • Used in Arctic Cat, Kawasaki and Polaris flyweights WEIGHT BUSHING DRIVER 378492 164.99 • Can be used on both primary and secondary clutches to remove and replace clutch bushings • Fits all P85 and P90 snowmobile clutches • Requires piston pin puller - part # EPIPRT1 • Replacement tool kit for Polaris # 2871025 CLUTCH BUSHING TOOL KIT • Works with all Polaris primary clutches that use pullers PCP-1, PCP-8, PCP-9 and PCP-12 • All Polaris models except All US Twin Motors 1997-99, 550 Fuji motors with CV Tech clutches 2014-18 381851 59.95 EZ CLUTCH TOOL This simple tool al lows you to change the spr ing and weights in your Polaris primary clutch without removing it from the motor! Simply remove the clutch retaining bolt, thread the EZ Clutch Tool into the clutch shaft and t ighten the adjustment bol t on the tool to compress the clutch. Now you can spin the clutch to each weight pin and change weights! Need to change the spring also? No problem! The tool is designed to allow the clutch cover to be removed also. With the EZ Clutch Tool in place, remove the cover bolts (mark the cover for reinstallation orientation first), and loosen the adjustment bolt on the tool to back the cover off and gain access to the spring. This is a must-have tool for the tuner to make quick and E-Z changes.
RkJQdWJsaXNoZXIy MzA4ODQ=